The NVIDIA Quadro 600 graphics card was released in December 2010 and has since been discontinued. It featured a Fermi architecture and was manufactured by TSMC on a 40 nm process, with a total of 585 million transistors and a density of 5.0M/mm². The chip package used was BGA-973.
With a release price of 179 USD, the Quadro 600 was equipped with 1024 MB of DDR3 memory and had a memory bus width of 128 bits, providing a bandwidth of 25.60 GB/s. The graphics card had a single-slot design and measured 168 mm in length and 69 mm in width. It had a TDP of 40 W and required a suggested PSU of at least 200 W. The only output option was a DVI port.
The Quadro 600 had a GPU clock speed of 640 MHz, a shader clock speed of 1280 MHz, and a memory clock speed of 800 MHz. It had 96 shading units, 16 texture mapping units (TMUs), and 8 render output units (ROPs). The graphics card had 2 streaming multiprocessors (SMs), each with 64 KB of L1 cache and a shared L2 cache of 256 KB.
In terms of performance, the Quadro 600 had a pixel rate of 2.560 GPixel/s and a texture rate of 10.24 GTexel/s. Its theoretical floating-point performance was 245.8 GFLOPS for single-precision (FP32) and 20.48 GFLOPS for double-precision (FP64) calculations.
The graphics card supported DirectX 12, OpenGL 4.6, OpenCL 1.1, and Shader Model 5.1. However, it did not have support for Vulkan. It also had a CUDA compute capability of 2.1.
The board design was a single-slot width and required no additional power connectors. It was powered solely through the PCIe 2.0 x16 interface. The Quadro 600 was compatible with a variety of operating systems and supported a maximum resolution of 2560x1600 pixels.
There were a total of 26 reviews for the Quadro 600 in our database. However, no information regarding its relative performance or retail boards based on this design was available.
In conclusion, the NVIDIA Quadro 600 was an entry-level graphics card aimed at professional users, offering a balance between price and performance. It provided decent performance for its time and was suitable for both 2D and 3D applications. However, with newer technologies and advancements in GPU design, it has since been replaced by more powerful and efficient graphics cards.
NVIDIA Quadro 600 - Full Technical Specifications
Graphics Processor
| Architecture | Fermi |
|---|---|
| Foundry | TSMC |
| Process Size | 40 nm |
| Transistors | 585 million |
| Density | 5.0M / mm² |
| Die Size | 116 mm² |
| Chip Package | BGA-973 |
Graphics Card
| Release Date | Dec 13th, 2010 |
|---|---|
| Production | End-of-life |
| Launch Price | 179 USD |
| Bus Interface | PCIe 2.0 x16 |
| Reviews | 26 in our database |
Clock Speeds
| GPU Clock | 640 MHz |
|---|---|
| Shader Clock | 1280 MHz |
| Memory Clock | 800 MHz |
Memory
| Memory Size | 1024 MB |
|---|---|
| Memory Type | DDR3 |
| Memory Bus | 128 bit |
| Bandwidth | 25.60 GB/s |
Render Config
| Shading Units | 96 |
|---|---|
| TMUs | 16 |
| ROPs | 8 |
| SM Count | 2 |
| L1 Cache | 64 KB (per SM) |
| L2 Cache | 256 KB |
Theoretical Performance
| Pixel Rate | 2.560 GPixel/s |
|---|---|
| Texture Rate | 10.24 GTexel/s |
| FP32 (float) | 245.8 GFLOPS |
| FP64 (double) | 20.48 GFLOPS |
Board Design
| Slot Width | Single-slot |
|---|---|
| Length | 168 mm |
| Width | 69 mm |
| TDP | 40 W |
| Suggested PSU | 200 W |
| Outputs | 1x DVI |
| Power Connectors | None |
| Board Number | P1033 SKU 500 |
Graphics Features
| DirectX | 12 |
|---|---|
| OpenGL | 4.6 |
| OpenCL | 1.1 |
| Vulkan | N/A |
| CUDA | 2.1 |
| Shader Model | 5.1 |
